topmark DANI PLUS Instrucciones De Uso página 21

SAFETY BELT INSTALLATION
A A (shoulder strap)
B B (belt)
C (crotch strap)
1
1
How to use the seat belt: Pass the buckles of shoulder belt A and waist belt B
through the loops located on the seat fabric and the stiff board which is hided in side
of seat fabric. Maker sure they are attached firmly before use (see fig. 1/2).
3
Crotch strap installation: As shown in fig. 3/4, move the crotch belt to the arrow
direction through the belt of the crotch belt, then insert the C hole of the hollow
plate, and try to pull down the fastener. Install the safety belt as shown in fig. 5.
USING
Hollow sheet
C
Sketch map of safety belt
2
2
4
21
Hollow sheet
Plastic buckle
Hollow sheet
5
EN