Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MIRRORBALL DRIVER
General Safety Instructions
•
Always read the user guide before using the equipment.
•
Keep the user guide in a place where everyone can read it.
•
Use the equipment indoors and not in humid places.
•
Never remove or insert a plug from or remove it from a wall socket with wet hands.
•
If the plug and/or cable and/or cable input of the equipment is damaged, it must be repaired by a
professional.
•
Always take the plug out of the wall socket in the event of a thunderstorm, and also when the
equipment is not to be used for a while.
•
Never remove the plug from the power socket by pulling on its cable.
•
Install the equipment in such a way that sufficient cooling is possible.
•
Never use the appliance in the vicinity of heat sources or in direct sunlight.
•
Make sure that no small objects or liquid can get into the appliance.
•
Only clean the appliance with a slightly moist dust-free cloth. Do not use cleaning products or
solutions!
•
The appliance contains no components, other than those mentioned in the user guide, which can
be repaired or replaced by the user.
•
If the appliance is defective, it must be repaired by a qualified repairs company.
•
Keep the equipment out of the reach of children.
Warning
Risk of fire:
Fit a mirror ball with motor at least 0.5 m from flammable materials (decorative materials and similar).
Danger:
Before using a combination of mirror ball and motor for the first time, its fitting must be checked by a
professional.
•
The fitted motor and mirror ball construction must be serviced annually by a professional regularly.
•
Check the chain between the motor and mirror ball regularly, including the connecting points to the
motor and mirror ball.
•
Use sound materials for fitting the motor.
Assembly and Use
Please note:
Follow the instructions carefully and use your common sense when fitting the motor and mirror ball.
A mirror ball that falls can cause serious injury!
• The installation must be done in such a way that it can carry 10x the weight of the mirror ball,
without any visible distortion, for at least 1 hour.
• The motor must be fitted completely horizontally - check this with a spirit level. The battery supply
can hang vertically.
• Hang the motor and mirror ball out of reach of the public.
• Use all the screw holes in the housing.
• Use a chain of sufficient strength for fitting the mirror ball under the motor. The supplied chains are
suitable for the weight of the motor.
• Connect the installation to an earthed power socket.
ENGLISH
2
Publicidad
Tabla de contenido
