Cleaning And Storage - Clatronic BS 1247 Instrucciones De Servicio

Important note!
• Cleaning may become necessary after a shorter time, depending on the condi-
tions of use, e.g. when vacuuming fi ne dust.
• If the suction power of your vacuum cleaner diminishes please clean the fi lters
as described.
• If the suction power suddenly diminishes during operation this may be due to
the fi lters being locked.
Cleaning
• Pull the plug out of the socket before cleaning!
• Clean the casing with a dry cloth.
• Clean the motor protection fi lter approximately every 10
more often if necessary. Clean the fi lter in hot water without additives. Put it
back into place only once it is completely dry.
Storage
• Let the iron cool down completely.
• Wind the cable completely.
• Insert the hook of the nozzle on the back of the device into the parking aid (8).
05-BS 1247 neu 65
Outlet fi lter (13)
The appliance is also equipped with an outlet fi lter.
In order to ensure that the fi lter works correctly, we
recommend that you replace it every six months. It is
located on the rear part of your appliance behind a
ventilation grid. Open the ventilation grille by pressing
the lever on its side. Remove the fi lter and clean as
described above. Fit the fi lter back into place and
close the ventilation grid by following the steps above
in the opposite order.

Cleaning and storage

th time it is emptied, or
65
30.08.2005, 15:45:11 Uhr
GB