Hella 8ES 004 417-081 Manual De Instrucciones página 13

EN ENGLISH
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains cable is connected to the wall socket. The error
lamp will indicate if the battery clamps are incorrectly connected. The reverse polarity protection will ensure that the battery or charger
will not be damaged.
3. Press the MODE-button to select charging program.
4. Follow the indication lamps through the charging process.
The battery is ready to start the engine when
5. Stop charging at any time by disconnecting the mains cable from the wall socket.
13
DESULPHATION
ERROR LAMP
MODE-BUTTON
POWER LAMP
NORMAL BATTERY
is lit. The battery is fully charged when
BULK
SOFT START
PROGRAM
AGM BATTERY PROGRAM
ABSORPTION, READY TO USE ANALYS
FLOAT, FULLY CHARGED PULSE, MAINTENANCE CHARGING
SUPPLY PROGRAM
is lit.
RECOND PROGRAM