Performance Specifications - 3M Nano-Lok Serie Manual De Instrucciones

;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
DESCRIPTION:
Figure 2 identifies key components of the 3M™ DBI-SALA
wound Web Lifelines (A) with an in-line Energy Absorber (B) that retracts into a Nylon Housing (C). A Swivel Eye (D) on the
top of the Housing allows attachment to a valid anchorage connection point with a Carabiner (E), or mounting on a Full Body
Harness with a Harness Interface (F). Figure 1 identifies available Nano-Lok models and their connector configurations. See
Table 1 for Nano-Lok SRD and connector specifications.
Hot Work: Fire resistant "Hot Work" models are available for welding, foundry work, etc. where the SRD may be exposed
to sparks or flames for short durations.
Arc Flash: SRD meets the requirements of ATSM F887 and is designed for use in environments where an Arc Flash
(electrical explosion) could occur.
Component Specifications:
SRL Housings
Drum
Internal Components
Web Lifeline
Energy Absorber
Swivel
Connector Specifications:
Description
Carabiner
1
2
Single SRD Interface
Twin SRD Interface (Fixed D-Ring)
3
Twin SRD Interface
4
Snap Hook
5
Carabiner
6
Rebar Hook
7
Rebar Hook
8
Rebar Hook
9
Rebar Hook
10
Rebar Hook
11
Snap Hook
12
Snap Hook
13

Performance Specifications:

SRL Specifications (Z359.14 Class B)
Capacity Range
Maximum Arresting Force
Average Arresting Force
Claimed Maximum Arresting Distance
Minimum Fall Clearance Required
Maximum Free Fall
2
SRL Specifications (Model 3101656)
Capacity Range
Maximum Arresting Force
Average Arresting Force
Claimed Maximum Arresting Distance
Minimum Fall Clearance Required
Maximum Free Fall
2
1 - Assumes the SRL is mounted directly above (overhead) the end user.
2 - SRL must be mounted above user D-Ring
Table 1 – Specifications
Nylon
Nylon
Stainless Steel and Zinc Plated Steel
Kevlar Nomex
Cover: Kevlar Nomex, Web: Polyester, Stitching: Nomex
Zinc Plated Steel
Material
Steel
Steel
Steel
Steel w/Nylon Insert
Aluminum
Aluminum
Aluminum
Steel
Aluminum & Steel
Steel
Aluminum
Steel
Steel
ANSI/OSHA Models
130 lbs - 310 lbs (59 kg - 140 kg)
1
1
ANSI/OSHA Models
130 lbs - 310 lbs (59 kg - 140 kg)
1
1
Nano-Lok Self-Retracting Devices (SRDs). Nano-Lok SRDs are drum
®
Gate Opening
0.69 in (18 mm)
11/16 in (17 mm)
3/4 in (19 mm)
3/4 in (19 mm)
1 in (25 mm)
3/4 in (19 mm)
2-1/2 in (64 mm)
2-1/2 in (64 mm)
2-1/2 in (64 mm)
2-1/2 in (64 mm)
2-1/4 in (57 mm)
3/4 in (19 mm)
3/4 in (19 mm)
1,350 lbs (6 kN)
900 lbs (4 kN)
30 in (0.76 m)
4 ft (1.2 m)
3 ft (0.91 m)
1,350 lbs (6 kN)
900 lbs (4 kN)
30 in (0.76 m)
5 ft (1.5 m)
3 ft (0.91 m)
11
Gate Strength Tensile Strength
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
3,600 lbs (16 kN) 5,000 lbs (22.2 kN)
OSHA Models
311 lbs - 420 lbs (141 kg - 191 kg)
1,350 lbs (6 kN)
900 lbs (4 kN)
36 in (0.9 m)
5 ft (1.5 m)
2 ft (0.61 m)
OSHA Models
311 lbs - 420 lbs (141 kg - 191 kg)
1,350 lbs (6 kN)
900 lbs (4 kN)
36 in (0.9 m)
5 ft (1.5 m)
2 ft (0.61 m)