Operating; After Using - Beem Schneid-FiXX Superior Manual De Instrucciones

EN

Operating

Insert/remove attachment
(see image A)
Insert the attachment (7) into the fix-
‹
ture (2) and turn it clockwise until the
filling shaft audibly snaps in.
To remove, turn the attachment anti-
‹
clockwise.
Inserting/removing the rasping,
cutting and grater insert
(images B1 to B3)
Insert the desired grater insert into the
‹
fixture (2) (images B1, B2).
Put the safety pin into the fixture and
‹
turn it anticlockwise until it stops (im-
age B3).
NOTE
► The safety pin remains fixed during
cutting, rasping or grating.
To remove the safety pin, simply turn
‹
it clockwise until it releases.
Remove the safety pin and the grater
‹
insert.
WARNING
The slicers are very sharp!
► Only grip the plastic parts of the
grater.
BEEM - Elements of Lifestyle
Schneid-FiXX Superior
Using the appliance
Insert the attachment, the desired
‹
rasper, cutter or grater insert and the
safety pin.
Insert the plug into the mains socket.
‹
Place a bowl with edge under the at-
‹
tachment.
Cut the ingredients into pieces to fit
‹
into the feed shaft.
Remove the pusher.
‹
Put the ingredients into the feed shaft
‹
To feed the food downwards, insert
‹
the stopper into the feed shaft und
press it lightly while pressing the
ON/OFF button with the other hand.
NOTE
► Press the middle of the ON/OFF but-
ton otherwise it is possible that the
appliance will not run.
► The straight surfaces of the pusher
point forwards, the rounded point
backwards.

After using

Before cleaning, pull the plug out of
‹
the plug socket.
Clean the appliance and the ac-
‹
cessories as described in the sec-
tion Cleaning and maintenance
(page 18).
17