Keep Warm Function; Technical Data - Topcom Multi Steamer 401 Manual De Usuario

TOPCOM Multi Steamer 401
5.3 Baby Bottle Warmer
• Remove every accessory from the main unit, including the steamer bowl
• Use the enclosed measuring cup to measure 150ml water.
• Pour the 150ml water into the water reservoir
• Position the steamer cover
the steamer bowl.
• Put the baby bottle with milk into the gap on top of the steamer cover
• Press the On/Off button
• Press the warmer button
• Press the temperature increase
warming temperature (70° to 100°C recommended).
• The water will warm up and this will heat the baby bottle.
• After about 15 minutes, the heating process will be finished.
• The warmer led indicator will turn green and the heating element will return to
40°C.
• It will keep the bottle warm until you need it.
• Remove the bottle from the warmer using the enclosed bottle pincers.
• Disconnect the power after use.
Changing the cook temperature will influence the warming time. The higher the
temperature, the quicker the bottle will warm.
Always check that the food temperature by testing some on the back of your hand.
Do not keep the bottle longer warm than 1 hour.
5.4

Keep warm function

Once you have warmed your baby bottle or food, you can keep it warm.
• Make sure that there is 150ml water in the water reservoir
• Position the steamer cover
• Put the baby bottle with milk into the gap on top of the steamer cover
• Press the On/Off button
• Press the keep warm button
• Press the temperature increase
• The water will warm up and keep the baby bottle content on the selected temperature.
Do not keep the bottle longer warm than 1 hour.
Always check that the food temperature by testing some on the back of your hand.
6

Technical data

Power supply
Rated power
Temperature
7 Cleaning
• Disconnect the device and allow it to cool down.
• Clean it with a soft cloth or slightly damp sponge.
• Never allow that water or any other liquid enters the device or accessories.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
• The plastic components are not suitable for use in a dishwasher.
6
without the removable steamer cover lid
4
. The display will indicate the temperature.
13
to start the warming process.
15
/ decrease button
9
without the removable steamer cover lid
4
. The display will indicate the temperature.
13
to start the warming process.
14
/ decrease button
9
100-240 V/AC/50-60 Hz
350W
37°C - 100°C (+/- 5°C)
.
2
to select the desired
16
.
2
to select the desired temperature.
16
.
3
on
5
.
4
on the steamer bowl.
5
.
4
TOPCOM Multi Steamer 401