ELICA NikolaTesla Switch WH/A/83 Montaje Y Modo De Empleo página 86

Filter saturation indicator
The hood indicates when it is necessary to perform
maintenance on the filters:
Grease filter
the LED " "(17) turns on
the display (14) shows the symbol "G" (for 10 seconds from
switching on)
Activated carbon odour filter
the LED " "(17) flashes;
the display (14) shows the symbol "F" (for 10 seconds from
switching on)
Reset filter saturation
After having serviced the filters (both the grease and/or the
odour activated carbon filters) press and hold the Selection
Area (7):
The LED " " goes out and the indicator count is
restarted.
Note: Repeat the operation if both filters signals are displayed
simultaneously.
Automatic operation
The product is equipped with an air quality sensor that allows
the hood to automatically set the suction speed most suitable
to the type of cooking chosen.
To activate this function:
Briefly push the Selection zone (7), the LED "
up to show that the hood is working in this mode.
Automatic hood mode with SNAP®
For information on how to make the connection between the
hood and SNAP®, see the manual supplied with SNAP® or
visit www.elica.com.
Note: SNAP® is an auxiliary extraction unit able to operate at
the same time as the hood.
To activate this function:
Briefly press the Selection Area (7), LED"
" (22) light up to show that the hood is working in this
"
mode.
The suction area is equipped with a mechanical rotating
FLAP. To activate the product you have to switch on the hood
and open the flap. The hood is equipped with a sensor that,
when the suction function is activated and with the FLAP
completely closed, stops the motor automatically. The suction
function restarts only when the FLAP is reopened.
- when switching on the fan, the motor does not start if the
FLAP is closed:
the LED "OPEN" (23) lights up, a long beep will be emitted
every 5 seconds. the display (12) flashes
- if you close the FLAP when the motor is running, the latter
stops:
the LED "OPEN" (23) lights up, a long beep will be emitted
every 5 seconds. the display (12) flashes
This home appliance is designed to be used with a Window
sensor KIT (not supplied by the manufacturer).
By installing the Window sensor KIT (only if used in SUCTION
mode), the air suction unit will stop working whenever the
window in the room in which the KIT is used, is closed.
We recommend that you purchase the FDS - 100
Elektrotechnik Schabus KIT, which is available at the
Elektrotechnik Schabus authorised centres, or directly on the
website www.elektrotechnik-schabus.de.
•
must be carried out by qualified and specialised technical
staff.
WARNING: place the KIT in an area that cannot be
" (18) lights
accessed by the user after installation.
•
liability for any inconvenience, damage, fire caused by
defects and/or malfunctions and/or incorrect installation
of the KIT.
" (18) and LED
86
Open FLAP indicator
The electrical connection of the Window sensor KIT
The manufacturer of this home appliance denies all