CONVERTING TO DAYBED
Step 1:
A. Remove the 5 Large Screws (G) from the Side (A).
B. Remove the Side (A) from the Crib.
C. If it is not already, adjust the Mattress Support (F) to its lowest position by removing the 4 Small Screws (I),
moving them to the lowest position and tightening the 4 Small Screws (I) with the Allen Wrench (N).
G - Large Screw
Remove x5
F - Mattress Support should be
in the lowest position
A - Side
High Position
Middle Position
Low Position
888.226.4469 | 9