Phonic CELEUS 400 Manual Del Usuario página 10

37. Graphic Equalizer
This graphic equalizer allows you to adjust the frequency response
of a signal, with a maximum of ±12 dB of signal boost or cut for
each of the frequencies.
38. Power Indicator
This LED indicator illuminates when power of your CELEUS 400
mixer is activated.
39. Main Fader
This fader is the final level control for the Main Left and Right audio
sends, sent to the Main outputs on the rear. When pushed all the
way up, the Main L/R fader provides 10 dB of gain to the signal,
and when set all the way down, the signal is effectively muted. This
will also adjust the final output level of the signal sent through the
USB interface to the computer
40. Level Meter
This dual 41 segment level meter gives an accurate indication
of when audio levels of the Main L/R signal reach certain levels.
The 0 dB indicator illuminates is approximately equal to an output
level of +4 dBu (balanced), and the PEAK indicator illuminates
about 1.5 dB before the signal is dynamically clipped. To make
the maximum use of audio, set the various level controls so that
it sits steadily around 0 dB to make full use of audio, while still
maintaining fantastic clarity.
USB Recorder Description
The USB Recorder's source signal is taken directly from each
individual input channel. When playing audio, the signal will pass
through the Tape In/USB control and then is sent directly to the
main mix. The CELEUS 400 supports playback of WMA and MP3
files with bit rates of up to 320 Kbps is possible.
41. USB Port
Connect your USB flash drive to this input. Once a drive is
connected, the files will initiate and the main menu will appear on
screen. Users are advised to format their USB memory sticks with
the FAT-32 file system. This connector can also be used to connect
to your PC to take advantage of the onboard storage.
42. Display
This display will display the track number currently being played. It
also offers play, pause and record indicators as well as the current
play/record time.
43. Play Button
Push this button to start and stop playback and recording of the
currently displayed track. Starting a track after it is paused will
resume the track from the point at which it was paused (in both
record and playback mode). When in recording mode, push and
hold this button to finalize recordings.
44. Back/Next Buttons
Pushing these buttons will allow users to skip back and forwards
between tracks. When the menu is activated, these buttons are
used to scroll through on screen options.
6
45. Stop/Menu Button
Push this button to stop playback or recording when applicable.
Push and hold the button to access the USB recorder/player's
main menu.
45
44
40
46. Wireless Pairing Switch and Indicator
This switch turns the Bluetooth function of the CELEUS 400 on and
off. The "WIRELESS READY" LED will light up when a connection
is established between a SmartDevice and the CELEUS.
47. +48V Indicator
This LED indicator will light up when Phantom Power is activated
on microphone inputs.
46
37
41
42
43
38
39
47
CELEUS 400