Start Up Instructions - Garland CHOPPER 406 VE Manual De Instrucciones

5. START UP INSTRUCTIONS

5.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you will
find inside the box:
• Machine.
• Operation levers and clamps (A) (x 2)
• (B) Work table.
• Protection arches with screws (C) (x 2).
• Instructions manual.
Carefully remove all items from the box and make
sure that all listed items are present. Inspect the
product carefully to ensure that damaged elements
there are no. If you find any parts damaged or missing
some element do not use the machine until the defect
has been repaired or take all the pieces that made the
machine. Using the machine without all its parts or
defective parts can cause severe personal injury.
Do not dispose of the packaging of the machine until
you are sure that you have received all parts and that
the appliance operates correctly. The packing will be
necessary if you need to return the machine.
5.2. ASSEMBLY
Warning! For your safety do not connect the
machine to a power source until the machine is
completely assembled and you have read and
understood all the instructions in this manual.
5.2.1. ASSEMBLING THE LEVERS AND CLAMPS
Uninstall the bolt (1) loosening the nut (2) with a
wrench.
1
Place the lever with the clamp (3) inserting one end of
the control into the slot (4).
Install the bolt (1) and tighten the nut (2), so that the
control can be moved. Install the protection arch (5)
with 2 screws (6).
37/52
English
2
3
4