Network Confi Guration; Connecting To A Power Supply; Switching The Speaker On And Off; Network Requirements - Medion X61002 serie Manual Del Usuario

USA
Network confi guration
Network confi guration
The WiFi speaker is connected to the network via WiFi. The WiFi antenna
on the speaker receives the signals from your network router.

Network requirements

The network must meet the following requirements for the device to be
able to access music fi les on the network:
• The router used for the network must have a DHCP server function
so it can automatically assign the device a network IP address.
Otherwise, set the DHCP function in the web interface to manual.
• The media sharing function for UPNP must be set up on the router.

Connecting to a power supply

− Plug the power cable supplied (model number PS30D150K1200UD)
DC IN
into the

Switching the speaker on and off

Switching on the speaker

− Press and hold down the standby button
The operating LED

Standby mode

− Press and hold down the standby button
standby mode.
The operating LED
speaker using the supplied power adapter, as long as the battery is not
being charged.In standby mode with the power adapter connected,
the speaker maintains its network connection so that it is immediately
available to use when it is switched on again. The speaker consumes
more electricity in this operating mode than in standby mode without
the power adapter.
16
www.medionusa.com
socket on the device.
6
will light up in white.
6
will light up in white if you are operating the WiFi
5
to turn on the speaker.
5
to turn the speaker to
AFTER SALES SUPPORT
+1 866 633 4660
USA