Slendertone Flex Pro Manual De Instrucciones página 10

T -
T -
R O U B L E S H O O T I N G
R O U B L E S H O O T I N G
If you have problems getting your
through the following checklist:
When did you last change your pads?
Pads need to be changed every 20-30 sessions. Call our support
line below to place an order.
Have you removed all the plastic covers from both the grid and
black sides of the pads?
Remember to keep one set of covers to protect the black side
of the pads during storage.
Are the pads covering the metal studs?
Double-check the pads on your belt to ensure that the grid side
of each pad is fully covering the metal studs.
Are the batteries inserted correctly?
The batteries must be inserted in a specific way for the unit to
work (see page 6). If you find any corrosion within the battery
compartment call the support line below for assistance.
Is your unit inserted into the holder properly?
Remove the unit and wipe the pin with a dry cloth. Then re-insert
the unit, pushing it until it clicks into place.
Are the pads and belt positioned correctly?
Ensure the large, center pad is directly over your navel and
that the smaller pads are directly between your hip-bones
and ribs.
Still having trouble? Call us toll free on
1-800-551-2443
See www.slendertone.com for GelPads & Accessories
10
C H E C K L I S T
C H E C K L I S T
to work, you should go
SLENDERTONE FLEX PRO
English
C
C
A R I N G F O R Y O U R B E L T
A R I N G F O R Y O U R B E L T
You should not let your unit get wet, but you may wipe it clean
with a lightly dampened cloth. The belt can be washed, but
you must first remove the unit and pads. Always follow the
instructions on the label when washing the belt.
Never machine wash your belt. Always hand wash it in
lukewarm water. This protects the internal wiring from
damage in the washing machine.You should take care
even when hand washing and never wring the belt to
remove water.
Do not use any bleach when washing your belt.
Do not dry clean your belt.
Do not tumble dry your belt. Dry the belt on a flat
surface, but not on anything hot (e.g. a radiator)
as the belt contains plastic parts. Ensure the belt
is completely dry before use.
The belt must not be ironed.
SLENDERTONE
www.slendertone.com