Use - Keeping Water Warm; Cleaning And Care - Unold ECO Instrucciones De Uso

USE - KEEPING WATER WARM

1. With the keep warm function it is possible to keep water that has
already been heated at the selected temperature for a maximum
of 120 minutes.
2. Prepare the appliance as described above, however do not switch
it on yet.
3. Press the ON/OFF button for 3 seconds.
4. The display flashes three times before the boiling process starts.
5. The keep warm mode will be maintained for a maximum of 120
minutes, then the appliance will switch off for safety reasons.
6. If you want to end keep warm mode, switch off the appliance via
the ON/OFF button.
7. Keep warm mode will end automatically when you take the appli-
ance off of the base.
8. Caution: First unplug the mains plug, before you take the con-
tainer off of the base, to avoid a possible short-circuit hazard
due to water. To avoid burn injuries, do not touch or move the lid
as long as the water is boiling.
Boiling water can cause scalding. Therefore, please handle the
appliance with care when it contains hot water.

CLEANING AND CARE

1. Do not immerse the base, power cord or kettle in water or other
liquids or wash them in the dishwasher.
2. Wipe off the base and the kettle with a damp cloth and a little
dishwashing detergent. Do not use any abrasive scouring agents,
steel wool, metal objects, hot cleaning agents or disinfectants,
since they can damage the appliance.
3. The appliance must be completely dry on the outside before you
use it again.
Copyright UNOLD AG | www.unold.de
Allow the appliance to cool before cleaning it.
Before cleaning, always turn off the appliance and
unplug it from the power supply.
25