Oscillation Function / Swing Function; Cleaning And Care - Unold CLASSIC RED Instrucciones De Uso

Attention: If the appliance was previously on heating operation, the outflow-
DE
ing air will still be warm initially. Depending on the previous heating capac-
EN ity it can take some time until the appliance provides cool air.
When you adjust the fan function, you must place the rotary thermostat
FR
regulator on the highest position.
5. The appliance heats until the desired temperature is reached, then the
NL
appliance switches off. The appliance will switch on again as soon as the
room temperature drops below the set temperature.
IT
6. To switch off the appliance, place the rotary regulator on position "O" and
unplug the mains plug.
ES
Be aware that the appliance can become very hot - fire hazard! Particularly
ensure that children are kept away from the appliance.
PL

OSCILLATION FUNCTION / SWING FUNCTION

CLEANING AND CARE

1. Never use any abrasive scouring agents, steel wool, metal objects, hot clean-
ing agents or disinfectants.
2. You can remove dust in the appliance if you carefully hold a vacuum cleaner
against the air inlet and outlet grille.
3. Store the fan heater in a dry, safe place so that it is protected from dust,
shocks, heat and moisture.
22 von 60
Copyright UNOLD AG | www.unold.de
1. With this function it is possible to distribute the air flow over a
larger area, because the appliance swings back and forth in a
specific radius.
2. The oscillation function can be switched on in every mode. To
do this, switch the button upwards.
3. If you want to stop the appliance in a specific position, push
the switch again.
4. Switch off the oscillation function before you switch off the
appliance.
Switch off the appliance. To switch off the appliance, place the
rotary regulator on position "O" and unplug the mains plug.
Allow the appliance to cool completely.
Stand 24.2.2020