Genius feelvita FP400 Instrucciones De Uso página 33

WARNING!
PREPARING DOUGH
PREPARING SPONGE MIXTURES
Add further ingredients if required.
CHOPPING AND MINCING FOODS
Insert your choice of blade.
NOTE: To control the chopping/mincing process use the pulse function.
Processing hard ingredients such as nuts can scratch the inside of the bowl. This does not impair the
appliance's function.
USING THE CUTTING DISCS
Do not put your hands into the feeder. Always use the pusher!
pushing them through the feeder.
NOTE: The side you're using has to face up. Remember that the 2 in 1 discs can be used on both sides.
Empty the bowl (4) before the chopped ingredients reach the level of the cutting disc.
Insert the big blade (5).
„
Put the dry ingredients (e.g. flour, sugar, baking powder) into the bowl (4) first.
„
Close the lid (2) and switch the appliance on.
„
You can add the other ingredients through the feeder (1) while the appliance is running.
„
Insert the big blade (5).
„
Add butter, sugar and eggs (if necessary) into the bowl (4).
„
Close the lid (2) and switch the appliance on. Process until you have a creamy mixture.
„
„
„
Cut the ingredients into approx. 3 cm pieces and put them in the bowl (described in the section:
„
Maximum filling level).
Close the lid (2) and switch the appliance on.
„
Insert your chosen disc in the big bowl (4) (with the long shaft (9)).
„
Close the lid (2) and switch the appliance on.
„
Before processing foods with shells or stones, the shells and stones have to be removed.
„
Introduce the foods to be processed into the bowl through the feeder (1). Apply even pressure when
„
Instruction Manual
33
GB