Cleaning And Care - Unold 86895 Instrucciones De Uso

ance now swings autonomously in
a radius of 80°
6. If you want to switch off the swing
function, pull the oscillation but-
ton upward.
Setting the tilt angle

CLEANING AND CARE

To switch off the appliance,
switch the speed regulator to
"0", and unplug mains plug
from the electrical outlet.
Never immerse the appliance
in water. The motor or electri-
cal components of the appli-
ance must not get wet.
1. Never use any abrasive scouring
agents, steel wool, metal objects,
hot cleaning agents or disinfec-
tants.
18
You can tilt the
motor housing
horizontally
a certain extent
(approx. 20°).
Slightly unscrew
the knurled screw
(see illustration).
Tilt the basket
cover to the desired
angle. Caution: Only
tilt the cover in the
intended range and
not beyond the
point of tangible
resistance, to avoid
damaging the appliance. Fix the
fan in place in the set tilt angle
by tightening the knurled screw.
Switching off
7. To switch off the appliance,
switch the speed regulator to "0".
When you are no longer using the
appliance, unplug the plug from
to the electrical outlet.
2. Wipe off the stand tube and grille
of the fan with a slightly damp
cloth.
3. Store the fan in a dry, safe place
so that it is protected from dust,
impact, heat and moisture.
Copyright UNOLD AG | www.unold.de