Fault Code - Carlo Cracco Masterpro BGMP-9123 Manual De Instrucciones

EN
Please follow the steps:
1. Assemble the bowl to the main appliance.
2. Add the water （0.5L≤water≤1.75L） in the bowl.
(Caution: The water in the bowl should be more
than 0.5 liter. 0.5L water can be used for steaming
food for 30 minutes.)
3. Then cover the bowl lid without the measure cup.
4. Assemble the outside steamer.
5. Plug in.
6. Choose working mode (only heating mode or
heating+ mixing mode optional) to steaming.
Tips: Make sure air proof ring install on the bowl lid,
and then cover the bowl lid.

FAULT CODE

Code Explanation
E01
When doesn't install the bowl.
E02
Machine failures
E03 1.bowl lid does not install
2.or bowl lid was installed incorrectly
The motor have over heating protect
E04
after loading working long time.
Dry burning protect (when the bowl
inside temperature rise up to 140℃,
E05
the heating work stop and appear
E05 code)
Noted: if all of solutions still not working, please return to seller and Maintenance department
repair.
Solution
Correctly install the bowl on the main
appliance. ( After then still didn't work,
pls send to Maintenance department to
repair)
Return to seller and Maintenance
department repair
Turn off the machine, install the bowl,
or cover the lid, or take out the bowl lid
and re-install it correctly according to
the IM, reset the machine.
Stop the machine,and cool down the
motor 10-30 minutes,then restart the
machine. ( After then still didn't work,
pls send to Maintenance department to
repair)
Turn off the machine and let the
appliance cool down then restart it.
31
CLEANING
1. Before you clean the appliance,turn off the appliance and remove the plug from the socket.
2. While cleaning, don't immerse the bowl in water.
3. After the bowl cool down, remove the blade from the bowl. Clean the inside and outside of the bowl.
Always keep the contact pins at the bottom of the bowl clean and dry. Only Wipe the contact pins with
a wet cloth!
4. Unscrew the screw ring and remove all parts of the attachment. Don't clean the metal bowl in the
dishwasher!
5. Never use pointed or sharp objects for cleaning as this may damage functional parts or affect the
safety of the appliance.
6. The blade is very sharp! Handle it with care!
7. Wash all parts in hot soapy water. Clean them immediately after use. Rinse them with clear hot
water and dry them immediately.
8. We advise you to lubricate the blade with some vegetable oil.
9. Only wipe the main appliance with a damp soft cloth!
10. If the bowl and blade is hard to clean. You may add some hot soapy water in the bowl and
run the appliance at speed 1 for few seconds.
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
HOW TO INSTALL THE AIR PROOF RING
Please install "Air proof ring" according to the above figure.
32
EN