Gas Supply; Electrical Connections; Surface Burners - Haier QGAS740RMSS Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1

GAS SUPPLY

WARNING
Fire Hazard: Do not use
a flame to check for gas leaks.
WARNING
Explosion Hazard: Do
not exceed 25 ft-lbs of torque when making
gas line connections. Overtightening may
crack the pressure regulator resulting in fire
or explosion hazard.
Gas Pressure Regulator
Natural Gas:
Propane (LP) Gas:
Shut off the main gas supply valve before
disconnecting the old range and leave it off
until the new hook-up has been completed.
Don't forget to relight the pilot on other gas
appliances when you turn the gas back on.
CONNECTOR HOOKUP
Flexible
Option
Installer: Inform the consumer of the location of the gas shut-off valve.
Rigid Pipe
Option
2
ELECTRICAL
CONNECTIONS
WARNING
Shock Hazard: This
appliance must be properly grounded.
Failure to do so can result in electric shock.
Electrical Requirements -
Note:
Grounding
3

SURFACE BURNERS

WARNING
Fire or Explosion Hazard:
Do not operate the burner without all burner
parts in place.
Burners -
Caps -
Grates -
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD. DO
NOT USE AN ADAPTER. DO NOT USE AN
EXTENSION CORD.
Burner Grates

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Jgas640rmssQgas740rm1ss

Tabla de contenido