Usage; Dismantling; Maintenance; Cleaning And Care - Garant Group 95 Manual De Instrucciones

8.

Usage

WARNING
DE DE
Risk of injury due to the tool cabinet tipping over and workpieces
falling from it.
If workpieces overhang the edge of the tool cabinet there is a risk of it
tipping over.




EN
9.

Dismantling




10. Maintenance


FR FR


11. Cleaning and care

Powder-coated surfaces such as cabinets and garment lockers should be
IT IT
cleaned with a cloth soaked with luke-warm water to which neutral to
mildly alkali cleaning agents may be added.
Wood is a natural material which is aff ected by the ambient temperature
and humidity. To prevent the penetration of humidity and to restore the
natural grain and colour of the material, you can apply linseed oil to un-
varnished workbench tops every now and again (caution - cloths soaked
in linseed oil can ignite spontaneously!) or conventional cooking oil. Cold
pressed oil is particularly recommended for this, since it does not clog the
ES ES
fi ne pores, and penetrates better into the wood.
44
Where necessary, anchor the tool cabinet to the fl oor.
Secure the overhanging workpieces
Before using the tool cabinet, always check it for damage.
Keep the tool cabinet and accessory parts clean.
Clear cabinets of loose parts, and clean them.
Disassemble cabinets in the reverse order to assembly.
Regularly check all components and screw fastenings on the cabinets
for tightness, good condition and operation.
If there is any damage to the cabinets, to its components or accessory
parts, or any doubts about its safety:

Block access to the cabinet and prevent its use.

Have the damage repaired immediately.
 Replace damaged components and accessory parts immediately.