nedis SAMP40025WT Guia De Inicio Rapido página 7

Power Adapter Input
Power Adapter Output
Main parts (image A)
1 Control screw
Power adapter connector
2
3 Input port
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged or
defective product immediately.
• Do not expose the product to direct sunlight, naked flames or heat.
• Do not expose the product to water or moisture.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to
reduce the risk of electric shock.
• Do not plug or unplug the power supply with wet hands.
• The mains plug is used as the disconnect device, such disconnect device shall
remain readily operable.
• Risk of electric shock. The product should only be opened by an authorized
technician when service is required.
• Disconnect the product from the power source and other equipment if
problems occur.
100 - 240 VAC ; 50 / 60
Hz ; 0.15 A
max. 5.0 VDC ; 1.0 A, 5.0 W max. 5.0 VDC ; 1.0 A, 5.0 W
4
5
7
100 - 240 VAC ; 50 / 60
Hz ; 0.15 A
LED power indicator (on/off )
Output port