Power Dynamics PDL10-600 Live Set Manual De Instrucciones página 4

10. MAIN Output
Output signal sent to the output stage. For the connection of an extra
amplifier.
11. AUX Output
Connector for an external sound effect generator or recorder.
12. PRE Output
Output signal for a separate amplifier. If a unit is plugged into this
output, the built-in amplifiers are automatically switched off.
13. PHONES Output
Connection for headphones
14. REPEAT Control
Set the number of sound repetitions (echo)
15. DELAY Control
Sets the delay time of the echo
16. SUB BASS FREQ CUT Control
Sets the separation frequency of the subwoofer / top.
17. SUB BASS LEVEL Control
Adjusts the strength of the subwoofer signal.
18. AUX Vol. Control
Adjusts the strength of the AUX output signal.
19. MASTER VOL. Control
Adjusts the strength of the overall (master) signal
20. PHONES Control
Adjusts the headphone volume.
21. LEFT-CH Output
Connect the left top speaker to this
speaker output (MINIMUM 8 Ohms
impedance)
22. RIGHT-CH Output
Connect the right top speaker to this
speaker output (MINIMUM 8 Ohms
impedance)
23. CHANNEL 3 LINE INPUT
RCA line input channel 3 suitable for
a CD player, keyboard, computer,
etc.
24. CHANNEL 4 LINE INPUT
RCA line input channel 4 suitable for
a CD player, keyboard, computer,
etc.
25. POWER Switch
Switches the unit on and off.
26. POWER Socket
Outlet for the mains lead