Technical Data; General Safety Rules - Ribimex PAINTY W10 Manual De Instrucciones

Man. Istr. PaintyW10 nuovo
GB
THANK YOU FOR HONOURING US WITH YOUR PREFERENCE.
Our new "Air Paint" turbo compressor airbrush has been designed and constructed to the strictest
standards of quality and precision in order to guarantee the highest coverage in the greatest safety.
Safe and easy to use thanks to a maximum 0.15 Bar operating pressure, the "Air Paint" airbrush per-
mits quick and precise spray painting. The reduced spraying of the paint lets painters work in a healthy
environment with consumption reduced to a minimum, thanks to the HVLP system (high air volume at
low pressure) for painting at constant air volumes and pressures.
DESCRIPTION
A) Turbo compressor
B) Model: PAINTY W10
C) Serial number and year of manufacture: see rating plate on turbo compressor

TECHNICAL DATA

Mains voltage
Power
Air volume
Operating pressure
Tank capacity
Nozzles
Vibration value
Sound pressure level
Sound power value
ELECTRICAL SAFETY RULES
IMPORTANT!: read these safety rules carefully before operating the airbrush for the first time.
1. Have the airbrush repaired by qualified personnel only.
2. Regularly check to make sure that the power supply cable is not damaged or worn out.
3. Whenever the cable must be replaced (fig. 9, n.3) contact only a qualified service center.
4. The airbrush is provided with double insulation. This guarantees greater safety and eliminates the need
for a grounding connection.

GENERAL SAFETY RULES

1. The failure to respect these warnings and/or tampering with the airbrush releases WEC srl
from any and all liability in case of injury to people or animals or damages to property or the
airbrush itself, while also completely invalidating the warranty.
2. Before operating the airbrush and every time it has been subjected to impact, make sure that no signs of
damage are evident, and contact your dealer or qualified personnel whenever damage is noted.
3 We recommend wearing adequate masks, gloves and goggles during use.
4 The airbrush must always be kept far from sources of heat and sparks.
5 Never spray in the direction of people or animals.
6. Never use the airbrush in humid areas or in the rain.
7. Always unplug the power supply cable before intervening on the airbrush and never pull on the cable itself.
8. Keep the airbrush out of reach of children.
9. Use the airbrush in well-ventilated areas.
10. The airbrush is particularly suited to use with water-based paints. Make sure to avoid using pro-
ducts (paints, thinners, etc.) that may prove harmful, corrosive or explosive. Use only products
with flammability index over 21° C. Check the rating plate on the container or the information provi-
ded by the producer of the material to be sprayed. Never spray any material that may create unk-
nown risks.
11. Whenever the machine can no longer be repaired, dismantle it by separating its parts for differentiated
recycling or elimination (plastic-metal-cardboard)
12. Carefully consider every risk that may be caused by the material to be sprayed.
13. Never use the airbrush for purposes other than those for which it has been expressly designed.
17-01-2008 9:47
230 V – 50 Hz
550 W
1450 l/m
0.15 Bar
1 liter
Ø 1.3 mm - Ø 3.00 mm
< 2.5 m/s
2
78.8 d B (A)
91.0 d B (A)
Pagina 10