Levelling The Fridge-Freezer And Adjusting The Doors; Fitting The Handles; Electrical Supply Connection - Haier HRF-628A Serie Manual Del Usuario

Levelling t he Fridge-freezer and
Adjusting t he Doors
Make sure that the appliance is on solid level flooring. If
the refrigerator is placed on a plinth, flat, strong and fire
resistant materials must be used.
This appliance has front adjustable feet, which can be
used to level the appl iance.
Insert a suitable flat screwdriver into the slots of the
adjustable feet. Turn the screwdriver clockwise to raise
the feet (Fig.4-9), and counter-clockwise to lower the feet
(Fig.4-10).
Levelling t he Doors
The doors may require some alignment before connecting
the fridge-freezer to the electrical supp ly. This can be done
by adjusting the levelling feet (Fig.4-9 and Fig.4-10).
To raise the left-hand door turn the left-hand foot clockwise
until it is level (Fig.4-11).
To raise the right-hand door, turn the right-hand foot
clockwise until the it is level.
Fitt ing the Handles
The door handles fix onto the mounting studs
already fitted to each door (Fig.4-12).
Use the Allen key from the instruction kit bag
1. Installthe handle firmly over the mounting studs.
2.Using the Allen key ,tighten the pin screw fixing
the handle on the door.
Do not over-tighten the pin screw.

Electrical Supply Connection

Connect the appliance to the electrical supply (220-240 V ~
50 Hz) with the plug and lead, which ar
Connections to the mains supply should be in accordance
with local regulations.
The appliance must be plugged into an earthed
!
socket.
Always make sure that the plug is accessible a fter
!
the appliance has been positioned.
Fig.4-9
Art No.600-0035 - Adjusting the feet
Art No.600-0035 - Adjusting the feet
17
Fig.4-10
Fig.4-11