Unpacking The Device; Location Of Controls; Power Supply - LEXIBOOK HPBT010 serie Manual De Instrucciones

Ocultar thumbs Ver también para HPBT010 serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
When unpacking, ensure that the following elements are included:
1 x 2-in-1 Bluetooth® Headphones / 1 x USB Type C charging cable / 1 x
3.5mm audio cable / 1 x Instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties
and tags are not part of this product and should be discarded.
Refer to the diagram p.2:
1. ON/Off - Bluetooth
2. Aux In jack
3. Play / pause
The Bluetooth® headphones operates with the USB type C charging cable
(included) or with a USB type adaptor (not included) 5V
Charging the device
1. Check that the Bluetooth is switched off.
2. Insert the small end of the USB type C cable
(included) into the USB type C charging port on the
right of the unit.
3. Connect the other end of the cable into the USB
port of your powered computer or USB type power
adaptor and connect it to a wall socket.
4. The LED lights up in red when the device is
charging. Once charging is completed, the LED light will turn off.
Note: Continue to enjoy listening to music with the Aux In cable when
charging the device.
Note: After approximately 5 minutes of inactivity, headset off automatically.
WARNING: Significant electromagnetic interference or electrostatic
discharges may cause the device to malfunction or lose data. If the device is
not functioning correctly, switch it off and then on again, or unplug the USB
cable.
WARNING:
• Risk of explosion if battery is incorrectly replaced. Please only replace it with
a same or an equivalent battery. (For Service instructions only; battery is not
intended to be replaced by the user).
• The battery should not be exposed to high temperatures, such as sunlight,
fire or anything similar.
• Keep a minimum distance around the device for sufficient ventilation;
• the ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.;
• no naked flame sources, such as lighted candles, should be placed on the
apparatus;
• the use of apparatus in tropical and/or moderate climates.
• Batteries should be disposed properly. Take them to the collection container
in order to protect the environment;
HPBT010series_2021version_IM2360_V07.indb 7

UNPACKING THE DEVICE

LOCATION OF CONTROLS

POWER SUPPLY

7
4. Next track / increase volume
5. Previous track / decrease volume
1A.
31/8/20 5:58 pm

Publicidad

Tabla de contenido
loading

Tabla de contenido