Safety Instructions - nedis BTTR400BK Guia De Inicio Rapido

Safety instructions

WARNING
-
•
Ensure you have fully read and understood the instructions
in this document before you install or use the product. Keep
this document for future reference.
•
Only use the product as described in this document.
•
Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
•
Do not drop the product and avoid bumping.
•
This product may only be serviced by a qualified technician
for maintenance to reduce the risk of electric shock.
•
Disconnect the product from the power source and other
equipment if problems occur.
•
Do not expose the product to water or moisture.
•
Do not expose cells or batteries to heat or fire. Avoid storage
in direct sunlight.
•
In the event of a cell leaking, do not allow the liquid to come
in contact with the skin or eyes. If contact has been made,
wash the affected area with copious amounts of water and
seek medical advice.
•
Do not leave a battery on prolonged charge when not in
use.
•
After extended periods of storage, it may be necessary to
charge and discharge the cells or batteries several times to
obtain maximum performance.
•
Read the manual carefully before use. Keep the manual for
future reference.
•
Disconnect the power supply before making or breaking
the connections to the battery.
•
During charging, the battery must be placed in a
well-ventilated area.
•
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
Charging the product
4
Charge the battery completely before first use.
1. Plug the USB power cable A
1
port A
.
2. Plug the other end of A
4 While the product is charging, the indicator LED A
up red.
4
When the product is fully charged the indicator LED A
is off.
Plugging in the product (image B)
• Plug the 3.5 mm mono jack A
6
into the Micro-USB charging
6
into a USB power source.
4
and the 3.5 mm stereo jack
6
3
lights
3