Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
guidelines for Using Extension Cords
• If you are using an extension cord outdoors, be sure it is marked with the suffix "W-A" ("W" in
Canada) to indicate that it is acceptable for outdoor use.
• Be sure your extension cord is properly wired and in good electrical condition. Always replace a
damaged extension cord or have it repaired by a qualified person before using it.
• Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Amperes
(At Full Load)
0–2.0
2.1–3.4
3.5–5.0
5.1–7.0
7.1–12.0
12.1–16.0
16.1–20.0
SPECIFIC SAFETY RULES FOR DRILLS
WARnIng:
(gAInED FROM REPEATED USE) REPLACE STRICT ADHEREnCE TO
PRODUCT SAFETY RULES. If you use this tool unsafely or incorrectly, you can
suffer serious personal injury!
Hold the tool by insulated gripping surfaces when performing an
•
operation
"live" wire will make exposed metal parts of the tool "live" and shock the operator. Do not drill,
fasten or break into existing walls or other blind areas where electrical wiring may exist. If this
situation is unavoidable, disconnect all fuses or circuit breakers feeding this work site.
Always use safety glasses or goggles.
•
glasses. uSe CeRTIfIeD SAfeTy eQuIPMeNT. Protective eyewear should comply with ANSI Z87.1
standards. use a dust mask or respirator for operations which generate dust.
Wear ear/hearing protectors
•
exposure to high intensity noise can cause hearing loss.
Hold the tool firmly
•
rotational force.
Always be sure you have firm footing
•
using the tool in high locations.
Do not hold the tool or place your hands near the rotating chuck or
•
drill bit.
Always check that the material being drilled is secure and clamped
•
in place
to bind, causing of control and injury.
never hold the workpiece in your hand, lap or against other parts of
•
the body
6
Extension Cord Length
25 Feet
50 Feet
18
18
18
18
18
18
18
16
18
14
14
12
12
10
DO nOT LET COMFORT OR FAMILIARITY WITH PRODUCT
where the cutting tool may contact hidden wiring or its own cord. Contact with a
to prevent injury that may result from loss of control because of high
Contact with any moving parts may result in personal injury.
if necessary to prevent any movement. An unstable workpiece can cause the drill bit
when drilling. Contact with the drill bit can cause injury.
3/8" VSR Electric Drill
Operator's Manual
75 Feet
100 Feet
18
18
18
16
16
14
14
12
12
10
10
10
8
8
Ordinary eye or sun glasses are NOT safety
when using this tool for extended periods. Prolonged
and check to see no one is below when
150 Feet
200 Feet
16
16
14
14
12
12
12
10
8
8
8
6
6
6
GD38B
Publicidad
Tabla de contenido
