Unpacking The Device; Power Sources - LEXIBOOK K920 serie Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

When unpacking, ensure that the following elements are included:

1 x Bluetooth® portable speaker

1 x Microphone

1 x Micro USB charging cable

WARNING: All packaging materials, such as tape, plastic sheets, wire ties and

tags are not part of this product and should be discarded.

The portable speaker operates with the micro USB charging cable (included) or

with a USB type adaptor (not included) 5V, 1A. Input: 100 ~ 240V, 50/60 Hz.

Power supply

1. Check that the unit is switched off.

2. Insert the small end of the micro USB cable (included) into the micro USB

charging port on top of the unit.

3. Connect the other end of the micro USB cable into the USB port of your

powered computer or USB type power adaptor and connect it to a wall socket.

The Bluetooth

4. Once loading is complete the LED light will turn off.

Note: Please note that the micro USB cable can be used for battery charging only

and not for data transfer.

The micro USB cable can be used for charging during playback.

WARNING:

- Danger of explosion if battery is incorrectly replaced. Please only replace it with

the same or equivalent battery.

- The battery should not be exposed to high temperatures, such as sunlight, fire

or anything similar.

- Significant electromagnetic interference or electrostatic discharges may cause

the device to malfunction or lose data. If the device is not functioning correctly,

switch it off and then on again, or unplug the USB cable.

- The normal function of the product may be disturbed by strong electromagnetic

interference. If so, simply reset the product to resume normal operation by

following the instruction manual. In case the function could not resume, please

use the product in other location.