weasy HVP10 Manual De Usuario página 8

USING YOUR GARMENT STEAMER
Before first use
Remove any sticker or protective cover from the steam head.
Unwind and straighten the cord before use.
When operating the garment steamer for the first time, allow it to steam for a few minutes. this will
remove any impurities and odours that might have been left by the manufacturing process.
When operating the garment steamer for the first time, you may want to try the steamer on an old
piece of fabric before steamer on an old piece of fabric before steaming your garment.
Warning: to avoid an electrical circuit overload, it is recommended that no other appliances are
plugged into the same circuit as your garment steamer when it is in use.
Note: when unpacking the garment steamer, check to see you have received all the items listed in
the parts list, before discarding the packaging.
Assembling/operating your garment steamer
1. press the water tank release button, pull out the water tank, open the water inlet cover and fill
tap water into the water tank until it reaches the MAXIMUM level (see flg.1).always ensure the
water tank is at least a third full. do not exceed the MAXIMUM level when filling the water tank.
Put back the water tank .
2. hold the appliance with your hand positioned safely at the neck of the garment steamer. in an
upright position, use your other hand to attach the fabric brush onto the steam head. the fabric
brush can be attached either way and will lock into position with an audible "click".
3. connect the appliance to a power outlet and switch on. press the power button, the power
indicator light will be flashing, appliance began to heating. when the lights stop flashing into
long bright, that preheat finished，you can start using. switch OFF the steamer by press the
power button. when the appliance is power off the indicator light will extinguish.
4. once the water is filled to the MAXIMUM level and the appliance is connected to the power
outlet, allow the garment steamer to preheat for before use.
5. This garment steamer has a intelligent automatic power off function. When the user stops
operating this product over a certain time, the product of internal control circuit will be cut off
power supply, prevent the happening of the accident, and can save electricity.
How to steam your garment
The garment steamer is easy to use and is perfect for removing wrinkles/creases from garments
and curtains as well as refreshing furnishing fabrics.
It can be used on most fabrics as long as the fabric is hanging or where the garment steamer can
be easily used in an upright position moving over the fabric in an up and down motion.
NOTE: the garment steamer is designed to be used in an upright position on hanging garments.
refrain from using the steamer in or on garments in a horizontal position.
1. check that there is ventilation behind the fabric otherwise moisture may build up causing
mildew.
2. check garment pockets are empty and turn-ups such as cuffs and hems are down.
3. hang the garment from a hanger and stretch the fabric slightly with one hand checking that
there is nothing behind the fabric that can be damaged by the steam.
NOTE: we recommend you do not steam over metal accessories. use caution and steam around
the metal accessories.
4. press and hold down the steam button. you will feel vibrations and hear a subtle humming
sound while steaming; this is normal, steam facing away from you and in an upright position.