Sure Flap MICROCHIP CAT FLAP Manual De Uso página 8

6. Clean off any loose debris, dust and dirt from the door before you install SureFlap,
see figure 5.
7. Mount SureFlap
house. See figure 6.
8. Mount the external frame on the outside of the house. Depending on the thickness
of the door, the tunnel will protrude through the frame by differing amounts. Under
no circumstances should you cut or drill through the tunnel as this contains
the microchip reader and will prevent the unit from working properly. Three
different lengths of screw have been provided for your use. Choose the correct
screw length to suitthe thickness of your door. If you are not sure, use the smallest
first, if this is too short use the next size up. Take care not to use a longer screw
than needed, as this may damage the main assembly front face. Screw the
external frame to the main assembly. See figure 7.
9. When SureFlap
screw holes on the external frame. Align the screw caps withthe slot pointing
inwards and then push firmly into place. To remove the screw caps slide a flat
blade screwdriver into the side slot and lever the cap out of the hole. See figure 8.
Installation in glass doors or windows
When working with cut glass always wear protective gloves as the edges may be
sharp.
®
SureFlap is ideal for mounting in single or double-glazed windows. If you need to have a
hole cut in a window, please ask a qualified glazier to do it, as cutting glass is a skilled job.
If you need to get a hole cut in your window the ideal size is 212mm (8.5") in diameter. A
mounting adaptor is available to complete an installation in glass, andis suitable for
covering holes from 210mm (8.5") to 260mm (10.25") in diameter, see figures 9 & 10.
For details of where to purchase this adaptor see our website www.sureflap.com.
If you have a double-glazed window you will need to get a replacement unit manufactured
with the hole cut in it.
Figure 9
®
in the hole with the main assembly (battery cover) inside the
®
has been mounted correctly, place the screw caps over the
Page 7
Figure 10