Connecting To A Smartphone Or Computer; Connecting To A Smartphone Via Qr Code; Connecting To A Smartphone Or Computer Using Bluetooth; Connecting To A Computer Using A Usb Cable - Garant 655010 Manual De Instrucciones

GARANT Electronic torque/rotational angle wrench HCT

10. Connecting to a smartphone or computer

20/02/2020 16:32
en
Peak: ---
0
Nm
Calibrated
1. Press the down function button or OK, enter the password if necessary and confirm with OK.
2. Select "Connection" and confirm with OK or the down function button.
3. Select Bluetooth "ON".
4. For connection to a computer: select HID "ON" and configure the following device settings:
Value separator
Data set separator
Nr. Separator
Keyboard lang.

10.1. CONNECTING TO A SMARTPHONE VIA QR CODE

1. Call up QR code on torque wrench.
2. Scan QR code using Hoffmann Connected Tools app.
» Torque wrench is connected to the app.

10.2. CONNECTING TO A SMARTPHONE OR COMPUTER USING BLUETOOTH

1. For connection to a smartphone: Load the Hoffmann Connected Tools app.
2. Search for devices using the app or computer.
» Nearby Bluetooth devices are displayed.
3. Select device (DTW...).
» Torque wrench is connected to the app or computer.

10.3. CONNECTING TO A COMPUTER USING A USB CABLE

1. Remove the cover from the torque wrench USB port and plug in the USB C plug.
2. Connect the USB plug to the USB interface on your computer.
40
20/02/2020 16:32
Measurement method
History
Connection
Data transfer
Workflow
Set the delimiter for separating the values and units when
transferring to a computer. Delimiter dependent on pro-
gramme used.
Set the delimiter for separating the individual data sets when
transferring to a computer. Delimiter dependent on pro-
gramme used.
Set the decimal point symbol for measurement values. De-
limiter dependent on computer keyboard language.
Set the computer keyboard language.
Instruction manual
CONNECTION
Bluetooth ON
Bluetooth Reset
OK
QR code SHOW
HID ON
Value separator
Tab