Battery Replacement - Cooper Atkins 351 AquaTuff Manual De Instrucciones

OPERATION - Continued:
5) The resolution default setting is tenth degree. To
change resolution to whole degree, press and hold
key and then press
6) Press
the backlight will remain on for 5 seconds and
automatically turn off.
NOTE: USE OF BACKLIGHT WILL
SIGNIFICANTLY DECREASE BATTERY
LIFE DUE TO INCREASED POWER
REQUIRED FOR BACKLIGHT OPERATION
7) The instrument has a "HOLD" feature to capture the
current temperature reading on the display. To activate
the hold feature, press and release the
current temperature reading will flash on the display
and the hold icon will appear at top of display. Press
the key again to return to STANDARD
TEMPERATURE MODE.

351 / 352 BATTERY REPLACEMENT

BATTERY REPLACEMENT:
1) Turn battery doorknob counter-clockwise until
rotation stops. The arrow on battery door knob will
point towards unlock
2) Pull battery doorknob to remove battery door
assembly. Remove batteries.
3) Referring to battery polarity drawing on rear label,
install (2) AAA alkaline batteries as shown.
4) To install battery door assembly, ensure that battery
doorknob is turned fully counter-clockwise and arrow
on battery door is pointed towards unlock
inward on battery door assembly until battery doorknob
is seated against housing. Rotate battery doorknob
clockwise until rotation stops. The arrow on battery
doorknob will point towards lock
TURN COUNTER-CLOCKWISE TO UNLOCK
key to turn on backlight. When pressed,
TURN CLOCKWISE TO LOCK
key.
icon.
icon.
4
key. The
icon. Push