Makita DVC750L Manual De Instrucciones página 9

Connecting the tool
Optional accessory
To connect the tool, connect the end of the hose to the
tool's extraction outlet. Depending on the tool, you may
need the optional joint 22-38 or the front cuff 24.
1 1
► 1. Hose 2. Joint 22-38 3. Front cuff 24
NOTE: When connecting the tool, always make sure
that the hose is connected to the suction inlet on the
cleaner.
Storage of hose and nozzles
The hose and nozzles can be stored on the tool as
illustrated.
1
2
► 1. Sash nozzle 2. Wide nozzle
3
2 1
When storing the hose, loop it on the tool and fix it with
the hook as illustrated.
1
2
► 1. Hose 2. Hook
Installing the shoulder strap
Optional accessory
Attach the hooks of the shoulder strap onto the mounts
of the cleaner as shown in the figure.
2
3
► 1. Shoulder strap 2. Hook 3. Mount
OPERATION
Using as a vacuum cleaner
NOTICE:
Be sure to dry the HEPA filter after pick-
ing up water or wet dust. If you use the wet filter, the
suction power may be reduced.
1. Install the hose and nozzle onto the suction inlet
and turn on the tool.
9 ENGLISH
1