QP-Audio 99DSP QPM Serie Manual De Usuario página 8

Balanced use with XLR connectors
1. Ground/Shield
2. +
3. -
Input
For unbalanced use, pin1 and pin3 have to be bridged
XLR connections
Caution! You must never use unbalanced XLR connectors
(Pin1 and Pin3 connected) at the mic input jacks if you want
to use the Phantom power supply.
6.3 : 1/4" Mono plug
Sleeve (Ground/Shield)
Strain relief clamp
Sleeve
Tip
Unbalanced TS connector
Tip (Signal)
Balanced 1/4" TRS connector
Sleeve (Ground/Shield)
Strain relief clamp
Sleeve
Ring
Tip
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced 1/4" TRS Connector
Insert send return 1/4" TRS Connector
Sleeve (Ground/Shield)
Strain relief clamp
Sleeve
Ring
Tip
Connect the insert send with the input and the insert return
with the output of the e ects device.
6
EN
Tip +
Rring -
Tip +
Ring -