Password Protection; Troubleshooting; General Use - Panamax VT1512-IP Manual De Instrucciones

Instruction Manual - English
VT1512-IP

PASSWORD PROTECTION

Once you have claimed your VT1512-IP, you can set up password protection. To do so you need to enter
the Local IP address of the VT1512-IP card into your browser. You can locate the Local IP Address by
clicking on Device Admin within the BlueBOLT user interface. This will take you to the embedded web
page of the VT1512-IP.
Note: You must be on the same network as the VT1512-IP to view the embedded web page.
Once you are logged into the embedded webpage of the VT1512-IP click on Configuration.
Input a user name and password, check the box for "Password Protection Enabled", and click
the "Update Password" button.
Once you have enabled the password protection, your browser will prompt you to sign in using
the new admin and password. Depending on your browser, you may need to refresh the page if
the log in screen flashes.
www.panamax.com
12

TROUBLESHOOTING

GENERAL USE:

My equipment doesn't turn on.
The VT1512-IP circuit breaker disconnects AC power from the
connected equipment.
There is no picture or sound on my TV.
BlueBOLT/Network connectivity:
Check these steps when having issues with BlueBOLT connectivity:
Is the VT1512-IP receiving power?
Is the BlueBOLT port on the VT1512-IP connected to an active
local area network with Internet connectivity?
Are the BlueBOLT Link and Activity lights on?
Is your Internet connection functioning? Can you access a
general web page through a web browser running on a computer
connected to the same local area network?
www.panamax.com
Make sure that the VT1512-IP is plugged into a working AC outlet. Check
all AC connections. Make sure VT1512-IP and connected equipment are
turned on. Confirm "POWER ON" and individual outlet status LEDs are
illuminated. Check to see if the circuit breaker on the VT1512-IP needs to
be reset (press in).
You have exceeded the ampere rating for your VT1512-IP. As a temporary
fix, disconnect one or more pieces of equipment. Ask you dealer about
additional PANAMAX products that may be required.
Ensure that the TV set is plugged into a powered AC outlet.
Check the appropriate connections to ensure that they are correctly and
securely installed.
Check the power cable and confirm the unit is ON.
Check the cables connecting VT1512-IP to the router/switch, cables
between the router/switch and modem and the cable connecting the
modem to the incoming Internet data jack (coax or DSL)
The "Link" light should be illuminated solid green if connected to a
LAN or solid blue to active LAN and is connected to BlueBOLT, and the
"Activity" light should be blinking intermittently (green).
If you have answered "Yes" to these questions and are still unable to
connect the VT1512-IP BlueBOLT, please contact Panamax customer
service at 1-800-472-5555.
13