Nikko RDC-140002 Manual Del Propietário página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

(3) Fit the battery case into the battery
compartment of your vehicle and push
in all the way. Release the stopper.
When you connect the connectors. make certain the vehicle switch is in the "OFF"
position.
Set connectors properly.(The connectors are designed to be connected in only one
way so that the positive(+) and the negative(-) terminals are connected accurately.)
Disconnect the connectors immediately after a run.
When you disconnect the connectors, don't pull by the cords.
Avoid short circuits because it is very dangerous.
Remove all the batteries both from the vehicle and the transmitter after a run.
HOW TO PLAY
HOW TO PLAY
HOW TO PLAY
HOW TO PLAY
HOW TO PLAY
(1) Extend the transmitter antenna.
You can control the vehicle at a longer dis-
tance by holding the transmitter higher with
the antenna straight up.
(4) Put the connector into the connector
holder on the side of the vehicle.
(2) Turn on the transmitter by operating
the control stick. (The power indica-
tor will light up.)
English
5 5 5 5 5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rdc-140003Rdc-140004

Tabla de contenido