Operating The Device Safely - Dometic Waeco PerfectCharge DC08 Instrucciones De Montaje Y De Uso

Transformador de carga y tensión
Ocultar thumbs Ver también para Waeco PerfectCharge DC08:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 54
General safety instructions
2.3
Safety when connecting the device electronically
DANGER! Danger of electrocution
D
 For installation on boats:
If electrical devices are incorrectly installed on boats, corrosion
damage might occur. Have the device installed by a specialist
(marine) electrician.
 If you are working on electrical systems, ensure that there is
somebody close at hand who can help you in emergencies.
WARNING!
!
 Always use an adequate fuse in the positive line between the
device and the battery.
 Make sure that the lead has a sufficient cross-section.
 Lay the cables so that they cannot be damaged by the doors or
the bonnet.
Crushed cables can lead to serious injury.
CAUTION!
!
 Lay the cables so that they cannot be tripped over or damaged.
NOTICE!
A
 Use ductwork or cable ducts if it is necessary to lay cables
through metal panels or other panels with sharp edges.
 Do not lay the 230 V mains cable and the 12 V DC cable in the
same duct.
 Do not lay the cable so that it is loose or heavily kinked.
 Fasten the cables securely.
 Do not pull on the cables.
2.4

Operating the device safely

WARNING!
!
 Only use the device in closed, well-ventilated rooms.
 Do not operate the device in systems with lead acid batteries.
These batteries give off explosive hydrogen gas that can be
ignited by sparks on electrical connections.
26
PerfectCharge/PerfectPower
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido