Maintenance; Maintenance Schedule - Husqvarna 128LX Manual Del Usuario

Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.

Maintenance schedule

Maintenance

Clean the external surface.
Examine the harness for damages.
Do a check for damages on the suspension ring.
Do a check of the throttle trigger lockout and the throttle trigger. Refer to
check of the throttle trigger lockout on page 8 .
Make sure that the cutting attachment does not rotate at idle speed.
Do a check of the stop switch. Refer to
9 .
Examine the cutting attachment guard for damages and cracks.
Make sure that the grass blade is aligned with the center. Make sure that the
grass blade is sharp and that the blade or center hole is not damaged.
Examine the trimmer head for damages and cracks. Replace if it is damaged.
20
"Click"
Maintenance
To do a check of the stop switch on page
CAUTION: To prevent accidental start,
remove the spark plug cap from the spark
plug before you do maintenance on the
product.
Daily Weekly
X
X
X
To do a
X
X
X
X
X
X
1570 - 001 - 14.10.2020
Monthly