Bosch EasyGrassCut 23 Manual Original página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
Children should be supervised to en-
u
sure that they do not play with the
product.
Application
When working with the machine,
u
always hold it firmly with both
hands and provide for a secure
stance. The garden tool is guided
more secure with both hands.
Always wait until the machine has
u
come to a complete stop before plac-
ing it down.
Never operate the machine with a
u
defective protection guard/cover or
without safety device. Ensure that
these are properly mounted. Never
use the garden tool when incomplete
or after unauthorised changes.
Never operate the machine if the
u
cord is damaged or worn.
Never replace non-metallic cutting
u
elements with metal cutting ele-
ments.
Never repair the garden tool yourself
u
unless you are qualified to do so.
Other persons and animals should
u
remain or be kept a suitable distance
away when using the garden tool.
The operator is responsible for third
parties in the work area.
Wait until the cutting head has com-
u
pletely stopped before touching it.
The cutting head continues to rotate
after the trimmer is switched off; a
rotating cutting head can cause in-
jury.
Bosch Power Tools
Work only in daylight or in good arti-
u
ficial light.
Avoid operating the trimmer in bad
u
weather conditions especially when
there is a risk of lightning.
Operating the trimmer in wet grass
u
decreases the efficiency of perform-
ance.
When transporting, switch the
u
garden tool off and pull the mains
plug.
Always ensure a safe working posi-
u
tion when working with the trimmer.
Always keep your hands and feet at a
safe distance from rotating parts.
Take care when placing product on
u
floor, as it may become a trip hazard.
Remove the mains plug before repla-
u
cing the spool.
Inspect and maintain the trimmer
u
regularly.
Always wear gloves when cleaning
u
product or replacing cutting means.
Be careful of injuries from the blade
u
used for cutting the cutting line.
After feeding cutting line, always re-
turn the trimmer to a horizontal
working position before switching
on.
Switch the garden tool off and remove
the plug from the socket:
– whenever you leave the machine
unattended for any period of time
– before replacing the cutting line
– if the cable is tangled,
– before cleaning or working on the
trimmer
English | 17
F 016 L94 033 | (04.06.2020)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Easygrasscut 263 600 hc1 h3 600 hc1 j

Tabla de contenido