Display Screen; Auto Programs - KUKEN EASYChef TOUCH 9000 Manual Del Usuario

DISPLAY SCREEN

1. Setup Button
2. Temperature Button 3. Timer Button
4. Speed Button
5. Stop Button
6. Interface shift dZot
7. Star/Pause Button

AUTO PROGRAMS

1. Home Button
2. Function Button
TO SET-UP BEFORE USE
1. Place the drive shaft correctly locked into the jug.
2. Insert the Jug into the Main Unit. Press down firmly to lock into place.
3. Choose difference accessories for difference cooking purpose.
4. Add the ingredients or water to the jug. If need food processor function. Then you need to attach food processor lid and
put ingredients directly through food dispenser.
EN
7
EN
5. Attach the Blender lid, or FP lid or Steamer.
6. Plug your Powercord into the main base. Switch on.
7. Click pictos of temp/time/speed. Use your finger to slide or rotate the knob to set the paramters. Click min or
sec on time picto to set corresponding parameters. Click
8. After parameters are set, click or press knob to start work. Click
or long press knob to stop.
9. Slide right or click the right dot in the red circle to enter into auto program interface. Click
dot in the red circle to home page/DIY interface.
10. Click pictos on auto programs interface to enter corresponding working interface. Set parameters as per step
7~8. Click to exit.
11. Slide left or click left dot in the red circle to enter into recipe interface. Click
circle to home page/DIY interface.
to shift between clockwise and reverse.
or press knob to pause or click
or the middle
or the middle dot in the red
8