Description And Connections - FTE Maximal DVB 300 T HD Manual De Usuario

1.3.

Description and connections

DVB 300 T HD module is used in the reception of free and coded channels transmitted according to DVB-T.
Each module allows the reception of SD and HD channels,
There is also the possibility to obtain the output in base band.
The programming of all the parameters of the module will be made through the buttons placed in the front panel.
The feeding cable between each module has to be twisted in order to minimize the radiation effects of the modules.
Each module has one Loop connector to cascade several modules at input and a Mix connector to do same in output
channels. The modulation system is type DSB (Double Side Band) and
C69.
The device also has an output in RCA connectors to connect easily with the MTW 310 modules, besides it has a video
auxiliary output in order to make configurations or verifying the existing ones.
In order to mix the base band output signal of the DVB 300 T HD with the TV installation, we recommend using MTW 310
module. This module has two modulators in vestigial side band, which will allow placing consecutive (or adjacent) channels
in the installation without intermodulaton problems among them. MTW 310 has two modulators, which allow connecting
two DVB 300 T HD modules by the means of MTW 310.
DVB 300 T HD
1.4. Accessories and examples of installations
1.4.1. Accessories
Amplifier 47-862MHz
Mod. AMP 310 P
Code 2003520
User's manual · DVB 300 T HD
Output Loop
USB for updating
Audio-video
RCA output
Modulated
channel output
Feeding connetors
7 Modules chasis
Mod. FRA 300
Code 2003304
and the following modulation in PAL of a TV or Radio channel.
the output channel is selectable between C21 and
Antenna input
Entrada LNC
RCA video
Auxiliar output
Mix input
Feeding Led
Frontal keyboard
- 2 - DVB 300 T HD
Terrestrial antenna
Mod. EVO 45+
Code 9003911
Version_en_1.0 FTE maximal