Proper Refrigerator Care
and Cleaning
Warning: To avoid electric shock always unplug your refrigerator before clean-
ing. Ignoring this warning may result in death or injury.
Before using cleaning products, always read and follow manufacturer's
Caution:
instructions and warnings to avoid personal injury or product damage.
General: • Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed
with warm water. Use sponge or soft cloth, dampened with the clean-
ing solution, to wipe down your refrigerator.
• Rinse with clean warm water and dry with a soft cloth.
• Do not use harsh chemicals, abrasives, ammonia, chlorine bleach,
concentrated detergents, solvents or metal scouring pads. SOME of
these chemicals may dissolve, damage and/or discolor your refrigera-
tor.
Door Gaskets:
• Clean door gaskets every three months according to general instructions.
Gaskets must be kept clean and pliable to assure a proper seal.
• Petroleum jelly applied lightly on the hinge side of gaskets will keep
the gasket pliable and assure a good seal.
Rear Condenser Coils:
• We recommend that you clean the rear of the refrigerator at least
twice a year.
Note: Some operating environments may require more frequent
• After unplugging your refrigerator, use a vacuum or a brush to clean
the coils.
Light Bulb Replacement
1.
Switch off the power to the refrigerator before unplugging.
2.
Remove the highest shelf.
3.
Allow light bulb to cool before removing.
4.
To remove the bulb cover, hold the left side and gently press in the right side
until the cover locks are free.
5.
Remove bulb by screwing it out counter-clockwise.
6.
Always replace with appliance type light bulb rated at 40 watts
or lesser wattage.
7.
Do not exceed the 40 watts rating at any time.
8.
Reinstall the bulb cover.
9.
Plug back the refrigerator power cord to the electrical wall outlet.
cleaning.
English
16
14