Instructions For Loading The Water Bottle - Honeywell HWB2052W Serie Manual De Instrucciones

8. inSTruCTiOnS fOr LOAding THE WATEr BOTTLE

WArning: Only use 3 or 5 gallon water bottles on this
water cooler.
WArning: Please make sure to turn OFF the unit when
the hot and cold water tanks are empty. Always have water
inside the tanks before turning ON any switch.
Loading bottles with spill proof cap
• This unit contains a funnel with a prong to avoid spills
when using bottles with spill proof cap.
• Carefully lift the bottle (approx. 40 lbs. for the 5 gallon
bottle). Bend your knees to lift the bottle, not your back.
Do not place hands over the opening of the bottle while
placing it on the unit. Please seek help if you are unable
to lift the water bottle.
• Invert the 3 or 5 gallon water bottle over the unit and
gently let the neck of the bottle slide into the funnel,
making sure the spill proof cap slides down into the
prong.
• The prong will break the spill proof cap allowing the
water from the bottle to go down into the funnel and
into the main reservoir without any spills.
• Allow the water to fill all tanks of the unit for
approximately one minute.
• Push in on all water levers to make sure water flows
from all faucets.
• Plug the unit back into the electrical outlet.
• Turn ON the hot water switch, wait a couple of minutes
and turn ON the cold water switch. Allow the unit to
reach the minimum cold and hot water temperatures.
This will take approximately 45 minutes and the
indicator lights will turn OFF.
• Test the water temperatures by pushing once again on
the water levers.
• Your water cooler is now ready for use.
10
5G
3G