PVC 5x5 m premium serie Manual De Instrucciones página 23

5x5 m series
GB
Instruc! ons
Select a fl at surface for the tent. Unpack the boxes and check if all listed parts are included.
with a cloth. In colder weather condi" ons we suggest to bring the roof to room temperature
before installing.
1
Assemble the roof frame by moun" ng parts 7 to 12 on the pipes (parts 1, 2 and 3).
Use the screws to a# ach the parts.
2
A# ach the reinforcement braces (parts 4 and 5) using screws (20) and wing nuts (21).
3
Li$ one side of the tent frame and a# ach the legs (4). Place the roof (28) onto the frame
and use the bungees (25) to fasten it.
Be sure not to put too much tension on the bungees in order not to make a# aching the
other side more diffi cult.
4
A# ach the legs on the other side and install the feet (13, 13a and 14) at the bo# om. Make sure,
that the leg pipes are in ver" cal posi" on, to avoid overten" on on the endwalls. A# ach the side
covers to the pipes (4) using hooks (27). Complete the bo# om frame with the required pipes
(2, 3 and 16) and connector (15). Use the long ground pegs (18) to fasten the legs to the ground.
5
Unfold the side walls (29) and the end walls (30) and a# ach the side walls to the frame using
the bungees (24). A# ach the end walls directly to the roof using the short bungees (25).
Use the short ground pegs (19) to fasten the end walls to the ground. The guy rope runs from
every corner of the tent and is braced using the screw hooks (17).
premium
23