Repairs; Troubleshooting; Technical Data - Proficook PC-WC 1064 Instrucciones De Servicio

A wrong or improperly performed repair brings danger to the user.
Repairs to electrical appliances must only be carried out by an authorized specialist. A damaged power cord must be changed only by a qualified electrician.
Before you contact an authorized specialist
The following problems can be solved by you by checking for the possible cause.
Problem
The appliance is not working properly or at
all.
The content is not cold enough.
Loud noise during operation.
Interior light does not work.
The housing becomes warmly.
Water on the outer surface.
NOTE:
If a problem still persists after following the steps above, please contact your trader or an authorized technician.
Measures / Weights
Height
Width
Depth
Net weight
Electrical connection
Rated current
Connection voltage
Product data sheet for household refrigerators / freezers
According to (EU) No. 1060/2010
Brand
Model
Category 1)
Energy efficiency class 2)
3)
Annual energy consumption
Net capacity cooling total
- thereof cold storage compartment
- thereof wine storage compartment
- thereof cellar compartment
- thereof storage compartment for fresh-food
Net capacity freezing total
4)
Star rating
Design temperature of other compartments
Coldest storage temperature of wine storage compartment
Frost-free
Temperature rinse time

Repairs

Troubleshooting

Possible cause
- Is the unit not connected to mains power?
- Is the temperature setting correct?
- Is the place unqualified?
- Does the content prevent the appliance door from
closing properly?
- Are the ventilation openings clear of obstruction?
- Is the temperature setting correct?
- Was the appliance door open for an extended
period?
- Is the appliance near a heat source?
Is the appliance not leveled vertically and horizontally? Adjust the feet accordingly.
- Is the unit not connected to mains power?
- Is the light bulb defect?
The refrigeration cycle takes place in the foaming. The heat exchangers are installed in the housing covered.
The appliance cut the interior heat, which must be dissipated through the housing areas.
On days of high humidity, condensation might occur on the outer surface of the appliance. This is no malfunc-
tion; you may simply wipe the water off.

Technical Data

Solution
- Insert the plug properly in the contact socket.
Check the fuse.
- Check the temperature setting.
- Check the ambient temperature.
- Check the appliance content.
- Unblock the ventilation openings, install the appli-
ance freely.
- Check the temperature setting.
- Open the door only as long as necessary.
- Check the installation location (see "Installation").
Liquid flow sounds in the cooling circuit are normal.
- Insert the plug properly in the contact socket.
Check the fuse.
- See the section "Interior light".
cm 104�7
cm 59�5
cm 60�0
kg 48�0
A 1�5
V~ / Hz 220-240 / 50
Proficook
PC-WC 1064
2
C
kWh/a 249
l 195
l -
l 195
l -
l -
l -
-
°C -
°C 5
-
h -
49