Connection - Schluter Liprotec LT EBR 1 Manual De Uso

Guarantee sufficient ventilation.

Observe the minimum distances to the neighbouring

components (see the
pack
, fig. C).
Make sure the distance between the mains cable and

connection cable of the receiver or LED strips is as large
as possible (at least 5 cm) and mains and connection
cables are not laid in parallel.
6

Connection

There is a possibility of electrical shocks when working
on an energised power pack!
Electric shocks can lead to severe or deadly injuries.
Before working on the components, make sure the

power pack is not energised.
Do not connect the power pack to the mains

connection until all connection work has been
concluded.
Bluetooth receiver directions for use
Directions for using the power
DANGER
EN
Connection
55