Control Panel - Domair OL-BKY26-A011A-10 Instrucciones De Uso

CONTROL PANEL AND REMOTE CONTROL
DESCRIPTION OF FUNCTIONS
1. Power on / standby key
2. Mode selection key
3. Mode indicator
4. «Decrease» key
5. Ventilation speed indicator
6. timer key
7. Fan speed selection
8. lCd screen
9. «Increase» key
1. POWER ON / STANDBY KEY
Press on the key
vice or put it into standby mode.
On start-up, the indicator
By default, the operating mode is venti-
lation mode.
On standby, the indicator
and the compressor stops immediately,
but the fan continues to run for 30 se-
conds.
Rev 0-27 11 19
to start-up the de-
lights up.
turns off
Fabriqué en Chine
2. MODE KEY
After switching on the device, press
this key to successively select cooling
(COOL), dehumidification (DRY), or
ventilation only (FAN) mode.
NOTE: For use from the remote control,
press one of the corresponding keys.
2.1 Cooling mode (COOL)
- press the MODE key to select the
COOL mode: the corresponding LED
lights up.
- press the increase (UP) or decrease
(DOWN) keys to adjust to the desired
temperature. The selected tempera-
ture is displayed on the screen. The
temperature can be adjusted from
16°C to 32°C.
- press the SPEED key to adjust to the
desired fan speed: the corresponding
LED lights up.
NOTE: To direct the airflow, manually
rotate the air outlet fins.
Page 41