Operations; Notice Before Using; Operation Instructions - Fairland Inverter-Plus Serie Manual Del Usuario

2. Operations

2.1. Notice before using

① The user is advised to start the water pump before the heat pump, and turn off the
② Check firstly for any water leakage of piping connection, then power on, press the
heat pump before the water pump for long life circle.
ON/OFF button of the heat pump, and set suitable temperature.

2.2. Operation instructions

Symbol
Note:
① You may set the desired water temperature from 12 to 35℃.
② The
on the right shows the inlet water temperature. The
③ After you turn on the heat pump, the fan will start to run in 3 minutes. In another 30
the set temperature by pressing
seconds, the compressor will start to run.
④ During heating, the
heating cooling,
①
2.2.1. Mode selections
will be light as standard when you turn on the heat pump.
Designation
Power ON/OFF
Mode
Heat/Cool/Auto
Up/ Down
will be light. During cooling,
and will be both light.
Press to power on or off the heat pump
Press to select Smart/Silence mode
Press to shift among cooling, heating and auto
Press to set desired water temperature
or button.
- 21 -
Operation
on the left shows
will be light. During auto
For users