Astralpool Viron CL Serie Instalación E Instrucciones De Funcionamiento página 4

1. Stop pump-close valves on the suction and return lines.
2. Open the air bleed valve on the lid.
3. Loosen lock ring and remove cartridges.
4. Lift out cartridges. Clean the cartridge by soaking it in a mild solution of chlorine and warm water for 15
minutes and then hose off with high pressure water.
5. Replace the cartridges – carefully locating it on the bottom spigot.
6. Clean the lid 'o' ring. Replace the lid and press firmly into place.
7. Tighten the lid lock ring until safety catch locks – do not overtighten.
8. Open the valves – start the pump.
The Viron CL 400 and 600 have been designed to minimise cleaning. On average sized residential pools it is
likely cleaning will only be required once a year. However, after storms causing severe ingress of dust and
debris into the pool, or in times where earthworks and construction are taking place nearby, cleaning may be
required as often as once per month.
NEVER LOOSEN THE LOCK RING WHEN
MODEL PART ELEMENT
NO. PART
CL400 43429 78083
CL600 43430 78084
Product Instructions 249
TO CLEAN FILTER CARTRIDGE
CLEANING FREQUENCY
THE PUMP IS WORKING
FILTER MAX
AREA FLOW
NO. RATE
m3/Hr
400 sq ft
2
38.0 m
600 sq ft
2
57.00m
MAX 4 HR
FLOW TURN
RATE OVER
L/M
42 700 168,000
42 700 168,000
6 HR PUMP SHIP
TURN SIZE KG'S
OVER
252,000 750w 37.0
2200w kg
252,000 750w 38.0
3000w kg
CUBIC
MEASURE
3
0.63m
3
0.63m
Page 3