Axis P1368-E Guía De Installación página 18

AXIS P1368-E Network Camera
1
Safety hook
2 Desiccant bag
14. Remove the plastic wrapper from the desiccant bag.
15. Remove the protective strip from the adhesive and attach the desiccant bag to the
top cover.
16. Close the housing. Alternately tighten the bottom cover screws a few turns at a time
until they are tight (torque 1.5 Nm). This will compress the bottom cover gasket evenly.
NO TICE TICE
NO NO TICE
Do not pinch any cables when closing the housing.
17. If required, loosen the screws on the weather shield, adjust its position and tighten
the screws.
18